/PRZWT/After the traditional cement mortar paving method gradually disappeared, ceramic tile adhesive as a new type of adhesive material quickly swept the home improvement market. At the same time, with the wide popularity of the thin paste process and the widespread application of ceramic tile adhesive, in order to meet the growing demand of consumers for the strength of ceramic tile paving, ceramic tile adhesive came into being, and quickly became an indispensable and important material in decoration with its powerful function.
So, is there a ceramic tile adhesive that can not only do a good job in the interface treatment of the brick back, but also be dedicated to paving large slabs and slabs. It has strong weather resistance, is suitable for indoor and outdoor use, and is simple and easy to understand to operate. Liduobao "All-round Player" L688 Super Net Taste 5-in-1 Multifunctional Adhesive (Two-component Adhesive) can be had! Let's see how powerful it is.
Net taste is environmentally friendly, safe and worry-free
The wet area in home life is easy to breed mold, and living in a house with a lot of mold will reduce people's resistance. At the same time, decoration coatings are not environmentally friendly, and they release harmful gases over time, causing harm to the human body and becoming a major health hazard.
Based on consumers' requirements for healthy and environmentally friendly decoration materials, Liduobao L688 super net taste 5-in-1 multi-functional adhesive insists on using green and environmentally friendly raw materials in the production process, does not contain formaldehyde, benzene and other harmful substances, and truly achieves mildew-proof and formaldehyde-free. Let masters use it with more confidence, and owners live with more peace of mind.
Super bonding, special for large boards
Liduobao L688 super strong net taste 5 in 1 multi-functional adhesive is a two-component green and environmentally friendly product, which is developed from powder and liquid with high-quality cement, refined sand and modifier. It has super strong adhesion, which can penetrate into the surface of vitrified brick wax powder to firmly bond, and comprehensively solve the problem of brick drop. Interface enhancement treatment with inorganic bricks with low water absorption rate such as large slab wall and floor tiles, rock slabs, and stone can effectively ensure the firmness of sticking. At the same time, it can ensure efficient batch scraping, ready-to-use brush during the paving process, which greatly saves construction time.
Interfacial hair pulling, stable anchoring
When the base layer surface is smooth, it is easy to cause insufficient stickiness with the tile glue, increasing the risk of tile shedding. The L688 super net taste 5-in-1 multi-functional adhesive has been thickened and thixotropic modified, and has a significant pulling effect. It can be applied to the back of the brick or on the wall for pulling treatment, thereby forming a rough surface to increase the surface porosity, thereby providing more bonding points between the base layer, tile glue and tiles, and playing a stable anchoring role.
In addition, after curing, it can also form an interpenetrating network structure between inorganic materials and organic polymers, improve the bonding strength between the base surface and the bonding material, and effectively solve the common problems of hollowing and falling off in ceramic tiles and stone wet stickers.
Excellent weather resistance, available outdoors
In order to pursue the overall effect, some owners choose to tile the exterior wall, but under the influence of the wind and sun, the exterior wall often becomes the hardest hit area for brick loss. The L688 super clean taste 5-in-1 multi-functional adhesive can effectively improve the problem of brick loss on the exterior wall. It has excellent weather resistance, can resist the comprehensive damage caused by outdoor temperature and climate change to a certain extent, and slows down the aging of tiles. The use of L688 ceramic tile glue can effectively ensure a stable and lasting tile bonding effect.
Construction steps
Step one
Clean the back of the tile first to ensure that the surface is free of water, oil, floating ash, mold release agent and other attachments, and then place it for later use.
Step two
Pour the liquid and powder into the container and stir well, let it stand for 5 minutes, and stir at low speed for 1 minute.
Step three
The back of the tile is flat facing up, and the adhesive is evenly applied to the back of the tile using a roller or brush.
Step four
The tiles are dried to dry, and then pasted with Liduobao tile glue after curing. The drying and curing time is affected by factors such as coating thickness and environmental conditions (temperature, humidity, ventilation conditions, etc.). Normally, it takes more than 24 hours.
Note: It is forbidden to add water during use, and the stirred slurry should be used up within 2 hours.
